Mc-techgroup MV3_2-H Series Data sheet Bedienungsanleitung PDF herunterladen

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany

info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111

11.3

Embracing Challenge



Electrically heated up to max. 180 °C



Integrated thermostat



Status contact output



Sure connection technique



No cold bridges



Easy to maintain



Option ball valve with position identi-

cation

Special Features

Electrically heated valves

series V3/2-H, MV3/2-H

Version V3/2-H /PE, 3/2-way ball valve, electrically heated up

to 180 °C, Version MV3/2-H, 3/2-way solenoid valve, electrically

heated up to 180 °C

V3/2-H

Application

In analysis technique, often temperatures

must be kept above the sample gas dew

point. Therefore, it is absolutely necessary to

avoid cold bridges. In order to ensure this,

the temperature regulated M&C three-way

valves V3/2-H and MV3/2 H are used for the

cut-off or switching-over of sample gases and

test gases up to an operating temperature of

180 °C.

Description

The M&C electrically heated valves are fixed

on a mounting plate, decoupled from heat

and covered with an insulated enclosure. The

heater consists of a heating element with

high capacity. The temperature is adjustable

on the integrated thermostat up to 180 °C

with high temperature limiter and low tem-

perature alarm.

The heat insulated enclosure with a bushing

for the dial thermometer is equipped with

quick acting bentlever closures. The connec-

tion box with integrated thermostat is installed

outside the enclosure on the mounting plate.

Version V3/2-H/PE has got an additional con-

necting box for the contact output of the

position identification. The power supply for

the solenoid valves version MV3/2-H is 24V

DC and the additional connecting box is

installed on the mounting plate. In order

to prevent cold bridges, the connecting fit-

tings are heated by means of thermal con-

ducting jaws. The electrically heated sample

lines type 3/4/5-N/M/H – see data sheet

3.1 – are fixed with mounting brackets.

Technical specications and illustrations are without

obligation, subject to modications. 03.96/11.06

1 2 3

Inhaltsverzeichnis

Seite 1 - Electrically heated valves

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany [email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 21

Seite 2 - Dimensions

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany [email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 21

Seite 3 - Technical Data

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany [email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 21

Kommentare zu diesen Handbüchern

Keine Kommentare

Mc-techgroup MV3_2-H Series Data sheet Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Mc-techgroup MV3_2-H Series Data sheet herunter. M&C TechGroup MV3_2-H Series Data sheet User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Mc-techgroup MV3_2-H Series Data sheet